![]() ![]() A trick to get the proper settings is to disconnect the camera from PEMPro, start Envisage and take an image of the desired duration. This will bring up PEMPro's Meade DSI Settings window. In PEMPro's menu click Settings->Meade DSI Settings. If an Image doesn't appear you can try adjusting the Meade DSI settings. If everything goes ok an image should appear. ![]() To test that PEMPro can use the camera switch to the Star Finder tab (see picture below) and set the exposure to 1.0 seconds (or other appropriate exposure duration).įinally, click Snapshot. Once the camera has been selected press Connect Camera. Lastly double check that you can still get an image with Envisage. If you cannot get your camera to appear try completely disconnecting the DSI camera and reconnecting it. If you disconnect and reconnect your camera or another click this box once or twice and PEMPro will re-query the Meade driver for camera changes. Then in the list box to the right select your DSI camera. In the drop down list box to the right of Connect Camera select Meade DSI Series. It's important that both Envisage and PEMPro do not try to acquire images simultaneously. Connect your camera and start Envisage to make sure your camera is 'seen' by Envisage: 5. Make sure PEMPro V2.0 Build 47 or later is installed. At the time of this writing version 7.05 is the latest. ![]() Make sure the latest version of Meade Envisage is installed. You can check for the latest version here: 3. At the time of this writing AutoStar Suite Version 5.0 is the latest. Make sure the latest Meade Autostar Suite is installed. File:///Users/asaint/tmp10/DSI_Review_HTML/DSI_Review.htm (7 of. By Meade's own manual, the Autostar Envisage main screen has 40 control settings –. Meade DSI Pro Camera Deep Sky Images “Your First Night Out”. View online Instruction manual for Meade 7' LX200 f/15 Telescope or simply click Download button to examine the Meade 7' LX200 f/15 guidelines offline on your desktop or laptop computer. Make sure to select the Custom button and check all ooptional components for possible.Net Framework updates. There have been additional updates as well so be sure to run Windows Update or Microsoft Update. Both Meade and PEMPro require that the.Net Framework 2.0 framework be installed. The DSI 1, DSI 2, and DSI 3 cameras are supported. Meade DSI Cameras Meade DSI Cameras PEMPro provides native support for the Meade DSI series of cameras. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |